Make the Connection!
Stainless Steel, Nickel Alloys, Alloy 20, Duplex 2205® and Super Duplex 2507®.
Pipe, Tubing, Fittings, Flanges, Bar, Plate and
Continuous Coil Tubing
We now offer Metric Tubing in Stainless Steel
We offer Tube Fittings by Hoke-Gyrolok®, Parker® and Swagelok®.
UNS Number N08810/N08811
Incoloy 800, 800H, 800HT and 800HP are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties. Incoloy 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. .
Available from Inventory
Pipe – Seamless and Welded
Tubing – Seamless and Welded
Fittings – Butt Weld, Socket Weld
Flanges
½” Thru 12”
Schedules 10s, 40s, 80s and 160
Pressure Fittings - Threaded
1/4” Thru 2”
150#, 300#, 3000# and 6000#
Bar- Round, Flat and Hex
Plate and Sheet
Specifications
Pipe – ASTM B407, ASTM B154
Tube - ASTM B163/515
Butt-Weld Fittings – ASTM B366 WPW, WPX, WPS
Flanges – ASTM B564
Pressure Fittings – B366
Bar – ASTM B408
Sheet/Plate – B409
Chemical Composition %
C |
Cr |
Fe |
Ni |
Al |
Ti |
Al / Ti |
Min |
||||||
.06-.10 |
19.0-23.0 |
39.5 |
30.0-35.0 |
.15-.60 |
.15-.60 |
.85-1.20 |
The above information is not guaranteed and not for design purposes.